16 years of R&D experience focus on HD video & industrial ethernet.
HDMI/DVI/VGA/SDI/IP Mixed Matrix
● HDMI/DVI/VGA/SDI/IP/Audio Random Combination
● Insert Board Card
◎ It adopts a plug-in board structure design with 4 channels per board, which can flexibly configure the input and output signal types and the number of signal channels, which is convenient for expansion and maintenance, and the host can be compatible with different signals at the same time.
◎ The maximum support resolution is 3840*2160/30HZ (optional), and the default maximum support resolution is 1920*1200/60HZ.
Matrix Feature
◎ With digital equalization adjustment circuit, output with signal pre-emphasis enhancement circuit, so that the signal can be transmitted over a longer distance, and the distance between input and output can exceed 30 meters respectively (no need for HDMI cables with chips).
◎ By default, it supports panel buttons, infrared remote control (infrared extension cables can be customized for free), matrix switching software, supports TCP/IP network control (optional), supports APP mobile phone and tablet control (optional), supports central control and splicing screen software control, each input supports Blu-ray DVD/3D/HDCP/EDID.
◎ With on-site switching memory protection when power off, it will automatically restore the state before power off.
◎ The blue-ray LCD display can display the switching status of each channel of the device, which is intuitive and convenient, and the appearance design is beautiful and high-end.
◎ Built-in expandable 64 scene control storage modes.
◎ Both input and output interfaces adopt electrostatic protection circuit, and the performance is more stable.
◎ Compatible with the codes and instructions of all similar products in the market.
◎ Full chip SMD technology, unique ESD electrostatic protection function.
◎ The international standard wide voltage input power supply is adopted, and the grid voltage fluctuates between 100V-250V, which can ensure stable output and greatly improve the reliability and stability of the system.
◎ The digital signal uses a point-to-point lossless transmission method, which effectively guarantees the high-fidelity output of the image signal;
◎ Telecommunication-level core digital switching chip, with super anti-interference and all-weather working ability;
◎ Bandwidth: 6.75Gbps Gain: 0dB Bit clock jitter: <0.15Tbit
Bit rise time: <0.3Tbit (20%--80%) Bit fall time: <0.3Tbit (20%--80%)
Maximum transmission delay: 5nS Switching speed: 200ns (maximum time)
◎ Serial control interface: RS-232, 9-pin male D-type interface, baud rate: 9600, 8 data bits, 1 stop bit, no parity; 2 = RX, 3 = TX, 5 = GND
◎ Ethernet control interface (optional): RJ-45 female interface, TCP/IP Server or UDP mode, adaptive 10M or 100M, full duplex;
◎ Mean time between failures: (MTBF) 80,000 hours
◎ Equipment size: 2U
◎ Weight: 6KG
DVI Board Features
1.4-channel HDMI input board (with 2 boards)
● Each board supports 4 channels of HDMI signal output;
● Support image resolution 1920x1200/60HZ; 4K*2K resolution (optional)
● Compatible with HDMI1.4 standard, HDCP1.3 protocol, DVI1.0 protocol;
● Support EDID management, each output interface can read the EDID of the display device on site;
● Point-to-point hardw are uncompressed real-time conversion;
● The transmission distance is greater than 30m (no need for HDMI cables with chips);
● With input and output preloading, the switching speed is faster;
● Plug and play, no software, no driver;
● Maximum power consumption 12W;
● Pixel bandwidth 165MHz, all digital;
● Interface bandwidth 6.75Gbps, all digital;
(Clock Jitter) <0.15 Tbit;
(Risetime) <0.3Tbit (20%--80%);
(Falltime) <0.3Tbit (20%--80%);
● Maximum transmission delay 5nS(±1nS);
● Signal strength T.M.D.S. +/- 0.4Vpp;
● Min/max level T.M.D.S. 2.9V/3.3V;
● Impedance 50Ω
DVI Board Features
2.4-channel HDMI output board (with 2 boards)
● Each board supports 4 channels of HDMI signal output;
● Support image resolution 1920x1200/60HZ; 4K*2K resolution (optional)
● Compatible with HDMI1.4 standard, HDCP1.3 protocol, DVI1.0 protocol;
● Support EDID management, each output interface can read the EDID of the display device on site;
● Point-to-point hardware uncompressed real-time conversion;
● The transmission distance is greater than 30m (no need for HDMI cables with chips);
● With input and output preloading, the switching speed is faster;
● Plug and play, no software, no driver;
● Maximum power consumption 12W;
● Pixel bandwidth 165MHz, all digital;
● Interface bandwidth 6.75Gbps, all digital;
(Clock Jitter) <0.15 Tbit;
(Risetime) <0.3Tbit (20%--80%);
(Falltime) <0.3Tbit (20%--80%);
● Maximum transmission delay 5nS(±1nS);
● Signal strength T.M.D.S. +/- 0.4Vpp;
● Min/max level T.M.D.S. 2.9V/3.3V;
● Impedance 50Ω