16 years of R&D experience focus on HD video & industrial ethernet.

Wireless 4K Video HDMI Extender 200m with IR

The products are designed to make your A/V device use more convenient, comfortable, productive and cost-efficient. The 4K HDM1 Wireless Extender will let the user experience of transmitting the HD content by wireless. The HDMI sources over wireless kit extends high-definition video and audio to any HDTV displays up to 200 meters away.

The extender follows the TCP / IP standard Wireless Transport Protocol, so it has high transmission rate and strong anti-interference capability. It also supports HDM1 mirror output and infrared remote control extension. The HDMI Wireless Extender is widely applicable to office presentation, lecture, education, conference, family entertainments etc.

Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

Inquiry

Write a Review

Features

◎ Aluminum shell, compact size and Slim design, more beautiful than iron shell, strong anti-interference

◎ Using an external dual - gain antennas. ultra-long-distance transmission, can reach 200m in air space when 1 to 1 transmission( May be affected by the use environment)

◎ The TX support one HDM1 loop output, for local screen monitor

◎ Support HDMI resolution: 480i/576i~1080P@50/60Hz, 4K@30Hz and SVGA~WUXGA

◎ Support 1 transmitter to 1/2/3/4 receivers transmission

◎ Digital 5GHz frequency wireless A/V transmission, high transmission rate and strong anti-interference capability

◎ Extends infrared remote to control source device from display side

◎ Simple Plug and Play. Full hardware design, no software installation required

Advantage

Parameter		Description
Video	Standards	HDMI 1.4; HDCP 1.4
	Maximum pixel clock	225MHz,digital
	Maximum data rate	10.2Gbps
	Resolution	3840X2160@30Hz and Backward compatible
	Video encoding	H.265
	HDMI Connector	HDMI-A
	Impedance	100Ω
	HDMI Cable length	Less than 5meters at 1920X1080@60Hz
IR	Interface	3.5mm earphone seat
	Signal direction	Unidirectional
	Signal type	Digital
	IR frequency	38kHz
Ethernet	Interface	RJ45port(568B)
Ethernet	Transmission distance	200m over cat6(P.S: After connecting the network cable, the wireless transmission will automatically fail)
Wireless	Wireless type	External dual 3dBi gain antenna
	Transmission standard	IEEE 802.11a/b/g/n
	Distance	In an open, barrier-free environment up to 200 meters by 1 to 1 transmission; 1 to 4 transmission less than 100m
	Frequency band	5GHz ISM Band
Other	Power supply	DC 12V/2A
	Power dissipation	MAX 25W
	Temperature	-5℃ ~ +70℃
	Humidity	5% ~ 90%
	Dimension	1107826mm
	The warranty	1 year without human damage

Diagram

● HDM1 Wireless Transmitter/Receiver 1pc

● IR Transmitter cable 1pc

● IR Receiver cable 1pc

● User manual 1pc

● DC power adapter 2pc

Diagram

Problem Description	Solutions
No display	1. Check the TV is on and has been connected with the machine. 2. Please check the TX power supply 3. Make sure the TV is working regularly
Display “Searching TX”	1. Please check the TX/RX power supply 2. The signal at the receiving end is weak, so shorten the receiver distance appropriately 3. Pls reset or turn off the power restart
Display “No signal Input”	1. Check the HDM1 signal is power on and output normal. 2. Check the signal source output resolution. 3. Make sure the HDM1 cable is properly connected
Transmission distance is short	1. Please adjust the angle of the antenna or adjust the placement 2. Concrete walls, Brick, Wallpaper, Metal, Bulletproof glass will shorten the signal cover range or cause big signal loss. 3. Co-channel interference. Pls select a new band or channel
Screen not fluent	1. Please adjust the angle of the antenna or adjust the placement 2. Co-channel interference. Pls select a new band or channel 3. The distance is too far, reduce the transmission distance appropriately
Infrared return is invalid	1, Please confirm whether the infrared transmitter or receiver is inserted into the wrong hole 2, The infrared receiver should be placed in front of the receiving range of the receiving device as much as possible

Application

◎ Remote OB Van/Truck Video Feeds

◎ Broadcast Studio Camera Feeds

◎ Long-haul Signal Transport

◎ TV station/video conference

◎ Lecture Hall Projector Connectivity

◎ Medical/Surgical Room Broadcast

◎ Small corporate campus video links

Get in touch with us

We welcome every customer and meet everyone's needs. For more information, please visit the website or contact us directly with questions or inquiries.